Tork 2101 SPST Die Cast Zinc Photo Control
APPLICATIONS:Parking lot lighting, building perimeter lighting, outdoor signage
SENSOR: Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants. Photocell responds to the light spectrum near to that of the human eye.
OPERATION: Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning, etc.
STANDARDS: Meets ANSI/UL773A.
HOUSING: Heavy Duty die cast zinc housing and base. Gasketed for maximum weather protection.
ENERGY SAVINGS: Works with screw base CFLs and LED lamps.
ON/OFF: Turn ON is 1 to 5fc, Turn OFF is 3 to 15fc, without the slide in position. ON/OFF adjustment is easily made by moving a slide cover. No tools required
TIME DELAY: ON and OFF
CELL: Cadmium sulphide, epoxy conformal coated, 1" diameter
CONTACTS: Remain closed between dusk and dawn. (The unit fails in the ON position)
LEAD WIRES: Three color coded, minimum 6 inch wire leads, #16AWG, rated for 105 degrees C
POWER CONSUMPTION: Averages under 1 watt
TEMPERATURE RANGE: -40 degrees to +140 degrees F (-40 degrees to +60 degrees C)
FAIL MODE: ON
WARRANTY: 5 Years
BRAND EQUIVALENT: Intermatic K4121M
PART NUMBER: 2101
We have timers to fit your every need, with the best selection and prices.